Flaro Drawer Pull

Dimensions: Drawer Pull: D3.42"(8.7cm) x H0.83"(2.1cm)
Hole Spacing: Hole to Hole: L3"(7.6cm)
Material: Metal
Finish: Brass
Weight: 90g
Grip Style: Smooth
Application: Cupboard, Cabinets

Product Note

Product includes one solid brass wall plate only. No electrical components included.

Installation Steps

Step 1: Turn Off the Power
As a safety precaution, turn off the power to the outlet or switch area at your home’s circuit breaker, even though you're only replacing the plate.

Step 2: Remove Existing Plate
Use a screwdriver to loosen and remove the screws on your current wall plate. Gently lift it away from the wall.

Step 3: Inspect Underlying Devices
Confirm that your dimmers, toggles, outlets, or other modules are properly secured and undamaged.

Step 4: Position the Brass Plate
Align the new brass plate over the existing devices, ensuring all openings fit cleanly around the controls.

Step 5: Insert Screws
Use the included matching brass screws to secure the plate in place. Start threading gently to avoid stripping the screw holes.

Step 6: Do Not Overtighten
Tighten the screws just enough to hold the plate snugly against the wall, over tightening may damage the brass or wall surface.

Step 7: Check the Fit
Make sure the plate sits flush, and all device cutouts are aligned for easy access and smooth functionality.

Step 8: Restore Power
Turn the power back on at the circuit breaker once you confirm everything is secure and properly positioned.

Step 9: Final Polish
Gently wipe the brass surface with a soft cloth to remove any fingerprints or dust from handling.

If you notice any misalignment or feel unsure, consult a licensed professional.