Luxora Chandelier

Dimmable: No
Chain/Cord Length: Up to 4.9ft (1.5 meter)
Adjustable Cord: Yes
Canopy/Backplate Dimensions:
Sloped Ceiling Compatible?: Upon Request
Installation: Hardwired
Voltage: 90-260VAC
Wattage:

Lumens: 100lm/watt
Certifications: UL, CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, ROHS, SAA, and VDE
Finish:

• Black

Material:

• Glass
• Copper

Light Source: LED Light Bulb (replaceable)
Bulb Included: Yes
Number of Bulbs:
Bulb Base: G9
Product Dimensions:

• Round - 6.2" x 23.6" / 16 x 60cm
• Round - 6.2" x 31.4" / 16 x 80cm
• Round - 6.2" x 39.3" / 16 x 100cm
• Round - 15.7" x 62.9" / 40 x 160cm
• Linear - 6.2" x 39.3" / 16 x 100cm
• Linear - 6.2" x 47.2" / 16 x 120cm
• Linear - 6.2" x 39.3" / 16 x 150cm

Weight:

Details:

Dimming: Fixtures with light bulb sockets are dimmable. Integrated LED lights are non-dimmable. For custom dimming projects - just ask us! - Contact Us

Hanging height: Standard hanging length is 60" (1.5m). Need a custom fit? Just ask, we're here to help! Contact Us

Sloped Ceilings: All wire-hung fixtures adjust to sloped or uneven ceilings with ease.

Dimensions: Need specific dimensions not listed on the product page? Contact Us

Instruction:

Step 1: Turn Off Power
Locate the circuit breaker or fuse box that controls the power to the installation area. Switch off the power supply to avoid any electrical hazards during the installation process.

Step 2: Mark the Mounting Holes
Hold the included mounting bracket against the wall at the desired installation height. Use a pencil to mark the positions of the screw holes on the wall. Ensure that the bracket is level.

Step 3: Drill Holes and Insert Anchors
Using a drill, create holes in the marked positions on the wall. Insert included anchors into the drilled holes to provide secure attachment points for the screws.

Step 4: Mount the Bracket
Align the holes in the mounting bracket with the anchors on the wall. Insert screws through the bracket holes and into the anchors. Tighten the screws using a screwdriver to securely fasten the bracket to the wall.

Step 5: Connect the Wiring
Carefully remove the cover of the LED lamp to access the wiring compartment. Identify the black (live/hot), white (neutral), and green or bare copper (ground) wires and connect them to your existing circuit.

Our in-house technicians can customize any order!

Popular Changes:

• Hanging length
• Material color or paint
• Emitting color
• Dimmable add-on
• Add or reduce size/dimension
• Redesign the entire lighting fixture to your suggestion

What We Do:

• Make minor adjustments above
• Create CAD drawings for your custom design
• 3D render the product into your photo

Speak with an expert on live chat or call us now from 9AM EST to 6PM EST.

Alternatively, leave us an email.